– ELECTROMAGNETIC VIBRATION FEEDER –

Vibratory Feeders provide an efficient and economical method of conveying bulk materials and offer a simple and easy means of controlling their rate of flow.

Rugged and dependable – Manufactured and proven on C-Mac Bagging Machines for many years.

Typical applications include feeding to packaging, batching, mixing, drying and similar applications.

• Flow-extraction from silo / hopper
• Flow-regulation for weighing equipment
• Flow-feeding for / in process lines Feeding weighing scales
• Dosing powders into mixing machines
• Spreading material over wide conveyors
• Maintaining constant flow into/feeding bucket elevators or conveyors
• Packaging equipment
• Metering product from bins or hoppers
• Food processing and chemical industries, plastics, metal parts, chemicals and ceramics

Hot and cold materials are easily handled.

HOW THEY WORK

A Feeder consists of a Trough attached to a drive via Leaf Springs within the drive the trough is vibrated at high speed by an electromagnet inside the drive. The magnet pulls the trough sharply down and back - then the springs return it up and forward to its original position. As the trough is pulled back and down, the material falls vertically to a new position forward in the trough. This action repeated at high speed causes the material to flow.

FEATURES

• Extremely accurate feed rate controls are an additional benefit of the electromagnetic feeder. These highly reliable feeders are rated for continuous duty and provide a constant feed rate even under varying head loads and with different material characteristics.
• Variable speed control
• Large openings prevent bridging
• No moving parts for operator's safety
• Very low maintenance requirements with few moving parts, no lubrication or greasing. Maintenance is kept to an absolute minimum.
• Quiet operating
• Low power consumption
• Encased in dust-tight housing
• Stainless Steel Chute

SPECIFICATIONS

C-Mac Vibrating Unit Model CVU-180L

• Overall sizes of Vibrator and Chute: Length: 1050 mm Width: 355 mm Height: 350 mm
• Max. Material Feed Rate: 60 m³ per hour
• High frequency - 3310 VPM at 50Hz
• Stroke – 1.5 mm
• Suspension mount Brackets
• Power: 240 volt/50 Hertz
• Current rating 1.5amps
• Prime coated and painted safety yellow

OTIONS

• Hoppers can be made to suit customer specifications for the electromagnetic vibration feeder.